Sales Hotline:+(86)0635-2929827 2937899

Chinese|English

milling machine cutter tooth

From:Liaocheng RZ Constr.Cutters Co.,Ltd 2015-01-14Hits:3215

Summary:milling machine cutter tooth 
   Plane tooth is also called milling milling machine cutter tooth or plane road teeth, basically from the specification,which is divided into 20 mm and 22 mm according to the size of the bottom diameter of the cutting tools to distinguish; Importd or domestic milling planer is according to the two dimension configuration tool bit, that is for the convenience of the user to replace segment, to ensure the milling planer cutter in milling planer, flexible rotation, and try to reduce the resistance in the work of the cutting tools and cut pavement materials quickly.
   The material: blade part generally adopt tungsten alloy material (equivalent to international label YG11C), hardness between 88-89 hra, bending strength of 2400 n/was, density between 14.5-14.9 cm3. Blade usually is chosed 42 crmo wear-resisting material, the use of cold and hot die forging technology of finish machining, heat treatment between 42 and 44 HRC hardness, hardness shoulds not be too high, too high hardness will cause a knife fracture; 65 mo gasket selection of hard elastic materials, 44 mm diameter, to avoid the cutting head milling planer directly wear of cutter holder at work, effectively protect the service life of the cutter holder;

LIAOCHENG RZ CONSTR. CUTTERS CO.,LTD is as a domestic milling gear shaper industry manufacturers,which is always adhere to the concep- fine and cheap.

 It is worth of chosing! 

Products

Sales Hotline
+(86)0635-2929827

Sales Hotline
+(86)0635-2937899